|
|
SYNERGY TELECOM PVT.
LTD. |
|
SYNERGY ENTER/HUTCH PLATE 4.6 HOLES WITH
ALL CABLES
Next
>> |
Product Code : SYNERGY ENTER PLATE
|
| |
Product Specification |
Wall Entry System
SYNERGY wall entry system is of
international standard design, featured by reliability
and huge capacity,
I. System Description
A typical cable entry system is made up of
the following parts:
1. Instert
2. 4" rubber booth with metal ring
3. Metal panel
4. Installation
accessories
II. Description of Parts
1. Insert
The rubber insert is fixed into the rubber
boot. Cables goes through the hole or holes in the
insert. To describe the design of an
insert, the following info is to be clarified:
A. Applicable Cables: 1/2, 7/8, 11/4,
15/8, etc;
B. Number of Holes in one insert: 1, 2, 3,
etc.
2. Rubber Boot
The rubber boot function to fix the
inserts to the metal panel,
usually 4" dia with stainless steel
rings.
3. Metal Panel
To specify a wall entry panel, the
following information is to be clarified:
A. Number of 4" holes with cones for
rubber boots
B. Lay out of the holes: 1 x 1, 2 x 2, 2 x
5, etc
C. Size of the metal panel
D. Details for installation to the
wall
4. Installation
Accessories
Customized design considering the material
of the wall.
SYNERGY recommends the following
designs:
A. M6 x 60 screw with anchors
B. Customized
designs
III. A clear description of the cable
entry system includes the following
info:
Available Example/ Customer
Choice
Cable Type Applicable 1/2, 7/8, 11/4, 15/8, etc.
7/8"
Number of Holes in the Insert
0, 1, 2, 3, or
customized 3
Number of Rubber Boots customized 16
Lay-out of Rubber Boots customized
4x4
Size of Metal Panel customized
25.5"x25.5"
Installation Accessories customized M6x60mm screw with
anchor
Description of the example : a wall entry system for 7/8
cables, with 16 rubber boots laid out
in 4x4, with 3 holes in each insert, size
of panel is 25.5"x25.5",
installed to wall with M6x60mm screw with
anchor. Model No. YL-WE783X16A
IV. Notes:
1. Parts in the above wall entry system
are available separately.
2. Customized
designs are
welcome.
|
|
<< Back
| |
|
|
|